Guards at the entrance into the MRI exam room, providing the most precise and reliable detection and prevention of ferromagnetic threats from entering Zone IV. FerrAlert™ HALO II provides significant assistance in the prevention of serious injury to patients and staff or equipment damage. Our New Visual Advanced Warning Technology alerts on the approach of ferromagnetic threats to Zone IV, well before the portal is reached. The greater the threat, the further away the warning is activated.
FerrAlert™ HALO II HAS EASILY UNDERSTOOD STATUS INDICATORS
GREEN – Go YELLOW – Warning RED – STOP!
NEW - INTELLIGENT VISUAL ADVANCED WARNING alerts on the approach of ferromagnetic threats to Zone IV, well before the portal is reached. The greater the threat, the further away the warning is activated. The audio alarm is activated only at the threshold if advanced visual warning was ignored. Ferrous objects not approaching the entrance to Zone IV do not trigger a warning.
(Ferrous object is not a threat, until it tries to enter the Magnet Room)
INSTANTLY PINPOINTS LOCATION OF FERROMAGNETIC OBJECT allowing the Technologist to quickly and easily identify all ferromagnetic threats – NO invasive pat-down or handheld detectors required.
ALARM STATUS IS ALWAYS VISIBLE FROM BOTH inside and outside THE MRI ROOM
Unlike all other detectors, ONLY FerrAlert™ allows the Technologist full control of the MRI room at all times. ACR and The Joint Commission require control of Zone IV at all times!
PATENTED TECHNOLOGY SUPPRESSES FALSE WARNINGS while providing the HIGHEST SENSITIVITY to ferromagnetic threats. This technological advancement reduces alarm fatigue and increasing throughput. The use of 24 sensors ensures uniform sensitivity and detection reliability from head to toe.
CONTINUOUS MAGNETIC DISTURBANCE MONITORING
provides instant feedback by 2 highly visible integrated bar graphs
MOST FLEXIBLE INSTALLATION
for all facility architectural layouts. Mounts unobtrusively with both in and out swinging doors
ALARM INDICATOR LIGHTS NOT BLOCKED BY AN OUTWARD SWINGING DOOR
SAFE, PASSIVE DETECTION
no electromagnetic radiation, RF radiation, or magnetic field
ADJUSTABLE SENSITIVITY AND AUDIO ALARM LEVELS
CONFORMS TO ALL APPLICABLE RECOMMENDATIONS AND STANDARDS
including FDA, ACR, AAMI, Joint Commission, FGI and VA
18 DETECTION ZONES
for ACCURATE and FAST finding of a ferromagnetic threat
COMPREHENSIVE SELF TEST FUNCTION
for hospital periodic maintenance requirements as well as piece of mind
to alert staff of MRI entrance ingression
REMOTE ALARM CAPABILITY
optional remote audio or visual alarm
FERRALERT™ APPROVED PATIENT TRANSPORT EQUIPMENT
available which will not trigger an alarm
|Dimensions: ||Height 83” (211 cm), Depth 2.25” (5.7 cm)|
|Adjustable Width: ||Model H22 – Adjustable width 42” – 52” (106.68 – 132.08 cm)|
Model H21 – Adjustable width 31” – 41” (78.74 – 104.14 cm)
|Medical Power Supply: ||100 to 240 VAC, 47 to 63 Hz, 42 Watts|
|Sensitivity: || Adjustable|
|Audio Alarm: ||In Portal|
|Photoectric Beam: ||Activates Alarm Function mode when moving object enters the FerrAlert Portal|
Complies with ES60601-1-8 International Standards for Medical Device Alarms
Complies with IEC 60101-1:2005 Medical Device Specification Requirements
All FerrAlert™ products are entirely passive in operation and are completely safe for your staff,
patients and MRI image quality.
Reminder: Ferromagnetic detectors should not replace current MRI Pre- screening procedures. To provide your patients and personnel with the most comprehensive safety, the use of diligent screening protocol together with our high quality ferromagnetic detectors is recommended.