Your Source for MRI Products

MRI Portable Anesthesia Machine, Model 1

Part # / SKU: 03-2200MRI

More Views

MRI Portable Anesthesia Machine, Model 1

Part # / SKU: 03-2200MRI

The Magellan-2200 Model 1 is compact, robust and flexible, easy to move and was designed great for use in the MRI Suite, and is certified to 3T.


An optional Trolley is available.


Note: This product is intended for use inside of the MRI environment (e.g., in the MR system room, close to the scanner). However, it should not be utilized directly inside of the MR system (e.g., inside of the bore of the scanner), itself.

Availability: In stock

$34,095.13
USA Price ONLY

Description

Details

The Magellan 2200 Model 1 MRI Anesthesia Machine is compact, robust and flexible, easy to move and was designed for military field hospitals, general civilian hospitals, office-based anesthesia and surgery centers of every description.

The Model-1 is pneumatically powered and contains an electronic ventilation monitor that is A/C or battery powered. The Model-2200 may be mounted on a table top or mobile cart.

The Model-1 is designed as a simple to operate unit containing all of the modes and necessary components to deliver a basic anesthetic, including a mechanical ventilator and a single agent vaporizer.

In standard use, the Model-1 may be used with a variety of face masks, endotracheal/tracheostomy tubes and other approved artificial airways that are a standard in any operating theater.

Specifications:

Height: 23 inches
Depth: 23 inches
Width: 17 inches
Weight: 45 LBS
Materials: Aluminum, brass and plastic
Operating Temperature Range: 35 to 110 degrees, F.
Gas Supply Sources:  
  O2 Main and Cylinders:   38-70 psi (50 psi is optimal)
  Air and/or Air Compressor:   38-70 psi (50 psi is optimal)
  Oxygen Concentrator:   3-10 psi
Fresh Gas Flow: 1 to above 20 lpm (each flowmeter)
Oxygen Flush Valve: Recessed, self-closing, push button color coded and labeled, provides 45-55 L/min. flow while depressed
CO2 Absorber System: King Systems KAB-9 (re-fillable), or KAB-1 (prefilled/disposable)
C02 Absorber Capacity: 400 grams soda-lime
Directional Valves: Built-in the CO2 absorber
CO2 Absorber Holding Bracket: Plastic, secured with knob to main frame of machine
Bag-Ventilator Switch/PVR
and Scavenger Outlet Port :
 
Hand-operated selector switch and rotating knob for PRV and Scavenging outlet
Bellows: Latex free, upward inflating, range from 0 to 1.6L
Bellows Presure Relief: Pre-set at 60 cmH20
Common Gas Outlet: Size indexed, quick connect
Tubing Circuit: King Systems F-360-61 or any standard anesthesia circle system
Gas Pressure Hoses: DISS/thread indexed, female connectors at both ends
Gas Inlet Manifold: DISS/thread indexed, male connectors with one way valves
Gas Inlet Manifold Filters: Located behind Manifold Air and O2 inlet male connectors
Oxygen and Air Supply Gauges:   0-3000 PSI reading color coded and clearly labeled
Gas Inlet Pressure Regulators: 0-3000 PSI reading color coded and clearly labeled
  Main Supply Cylinder:   DISS/threaded indexed for O2
  Safety back up Cylinder:   Pin Indexed, yoke mounted for "D" and "E" cylinders for O2
Oxygen Supply Failure Alarm:  
  Main and Safety Supply:   Pneumatically actuated when O2 supply falls below 35 psi
  O2 Concentrator:   Pneumatically actuated when O2 supply falls below 1 psi
  Alarm Power Source:   9 volt battery located in body of alarm box
  Alarm On/Off:   Labeled toggle switch located on body of alarm box
Oxygen and Air Flowmeters: Calibrated and scaled 0-10 LPM color coded. O2 flowmeter has a fluted control Knob for easy identification by touch
Oxygen Concentrator: To power O2 flowmeter only
Auxiliary Oxygen Flowmeter: Scaled 0-15LPM color coded and clearly labeled
Air Compressor: May be used to power ventilator and air flowmeter
Auxillary O2 Flow Selector: Scaled 0-10 LPM in set increments, used for pre/post anesthesia
Vaporizer: Penlon Delta-Sigma Series, bolt (cage) mounted, temperature compensated, very low maintenance
Airway Pressure Gauge: Dual Scaled in cmH2O and mmHg, located on front panel of ventilator
Pressure Guage Tubing: Attached to bag/vent switch arm
Mechanical Ventilator: Pneumaticaly powered, time cycled, volume constant, pressure variable
  Ventilator Pressure Relief:   Dual scaled in cmH2O and mmHg, Located on front panel of ventilator
  Volume Range:   0 to 1.6 L
  Insp. Flow Range:   0 to .90 lps
  Insp. Time Range:   .2 to 3.0 seconds
Exp Time Range:   .2 to 3.0 seconds
Ventilator Gas Power: 40 to 70 psi (50 psi optimal)
Requirements: Use toggle switch to select gas source
Wate Gas Scavanger: Positive and negative relief valves, 1 L resivoir bag, vacuum control knob
Total System Leakage: @ 30cm H2O 0ML/min
@ 80cm H2O 0ML/min
Internal System Compliance: @ 20cm H2O 1.1ML/cm H2O
@ 40cm H2O 1.3ML/cm H2O
Internal System Resistance: @ 1.0L/sec gas flow 4.11cm H2O
@ 0.5L/sec gas flow 1.80cm H2O
APL Valve Pressure Drop: @ 3.0L/min gas flow 0.12cm H2O
@ 30L/min gas flow 1.03cm H2O
Adjustable Pressure-Limit: Adjustable, 0 to 40 cmH2O
Storage:  
  Indoor:   +160 degrees Allow unit to warm to normal
  Outdoor:   -30 degrees O.R. temp for 1 hour

 

This anesthesia machine is designed to be used in conjunction with a monitoring system of your choosing.

Additional Information

Additional Information

Reviews

MRI Portable Anesthesia Machine, Model 1. >The Magellan-2200 Model 1 is compact, robust and flexible, easy to move and was designed great for use in the MRI Suite, and is certified to 3T

  • Price: $34,095.13 - In stock